Friday, May 9, 2008

Mobile Athlon 64

A line for mobile computing.

Sockets


At the introduction of Athlon 64 in September 2003, only Socket 754 and Socket 940 (Opteron) were ready and available. The onboard memory controller was not capable of running unbuffered (non-registered) memory in dual-channel mode at the time of release; as a stopgap measure, they introduced the Athlon 64 on Socket 754, and brought out a non-multiprocessor version of the Opteron called the Athlon 64 FX, as a multiplier unlocked enthusiast part for Socket 940, comparable to Intel's Pentium 4 Extreme Edition for the high end market.

In June 2004, AMD released Socket 939 as the mainstream Athlon 64 with dual-channel memory interface, leaving Socket 940 solely for the server market (Opterons), and relegating Socket 754 as a value/budget line, for Semprons and slower versions of the Athlon 64. Eventually Socket 754 replaced Socket A for Semprons.

In May 2006, AMD released Socket AM2, which provided support for the DDR2 memory interface. Also, this marked the release of AMD's Virtualization technology.

In August 2006, AMD released Socket F for Opteron server CPU which uses the LGA chip form factor.

In November 2006, AMD released a specialized version of Socket F, called 1207 FX, for dual-socket, dual-core Athlon FX processors on the Quad FX platform. While Socket F Opterons already allowed for four processor cores, Quad FX allowed unbuffered RAM and expanded CPU/chipset configuration in the BIOS. Consequentially, Socket F and F 1207 FX are incompatible and require different processors, chipsets, and motherboards.

No comments: